Phil's
Vintage 8mm, Super-8 and 16mm Films and Projectors
 |
STANDARD 8MM SILENT & SOUND MOVIE PROJECTORS
Eumig Mark-S,
Bell & Howell, Bolex, Sears, Kodak 8mm silent projectors & Eumig 8mm Sound
Movie Projectors.
The listings in this page are always current. Projectors
sold are immediately removed from the lists, so it is always
up-to-date.
Updated April 27,
2019
|
 |
Scroll down this page 
to see the 8mm movie projector models available.
8mm silent and sound movie
projectors on this page are for standard / regular 8mm film only (unless noted).
You cannot run super-8 movies on an 8 mm projector
unless it is a model made to run both.
See the difference in 8mm film and super-8 film HERE.
If you need a Super-8 Projector, click HERE .
I
have been working with and restoring movie projectors for more than 50 years.
All projectors are Fully
Refurbished; thoroughly
inspected, adjusted, lubricated, parts replaced and repaired as necessary to
restore to factory new running condition. Condition mentioned in the
description is cosmetic condition. All are guaranteed clean and in perfect like new
running condition with a good bulb and one take-up reel. All are 400' reel
capacity unless noted. Excellent for showing your films or to transfer them to
video (using your video camera to capture the projected image *). Every
projector will come with an 8mm sample film, one 400' take-up reel, good bulb and
instruction book. A number in ( ) brackets indicates if I have more than one of
that projector.
* Most of the
projectors here are excellent to use for transferring film to video, but none
have the capability of transferring the image to video through a line output.
You must use a video camera to take a picture of the projected image if you plan
to use the projector for video transfer. I do not take in repair jobs.I just service
the projectors I refurbish and sell myself.
PLEASE VIEW
WARRANTY AND RETURN POLICY
IMPORTANT NOTE - RETURN POLICY:
All projectors are guaranteed to be as described and running perfectly for a
full 60 days after delivery date, or I will repair it or replace it for another
comparable model. If I can't repair it and don't have a satisfactory
replacement, I will give a refund.
Please be sure about the type projector you need and what you order.
If, after you first receive a projector, you want to return it for a refund
because you bought the wrong format, thought it did something I indicated in the
description or on the page heading that it does not do, or you just decided you
don't want it after all, I will issue the refund less the initial shipping,
Paypal fees if that applies, plus a re-stocking fee of 25% of the selling price
of the projector.
STANDARD 8MM SILENT
MOVIE PROJECTORS
 |
SEARS TOWER 9292
8MM SILENT PROJECTOR
-
Excellent 8mm projector with automatic
threading to the take-up reel, 400' reel capacity, reverse and single
frame projection, fixed silent running speed of 16 frames per second,
f1.6 standard lens. Uses DFC or DFA 150 watt 120 volt bulb. Runs
beautifully and in Mint condition with instruction book and sample film -
$399
(No Discount)
|
|
BELL & HOWELL 465 DIRECTOR 1.2 ZOOM
8MM SILENT PROJECTOR
With a
wired remote control.
-
From the early 1960's, the slickest looking
projector Bell & Howell ever made with a wired mercury remote
control knob on a retractable 10' cord. A bright picture with
the fast f1.2 zoom lens and low-volt DLS, DCF or DKR 150 watt
bulb, two position lamp brightness switch to preserve bulb life
when transferring film to DVD through a video camera. Has a
retractable power cord and room light control. With 400' reel
capacity, automatic threading to the take-up reel, a variable
electronic speed control, reverse and single frame projection,
frame by frame advancement knob when viewing single frames. Like
New condition with the instruction book, test film and a splicer
with Presstapes. Runs like a dream -
$699
(No Discount)
|
 |
|
|
BELL & HOWELL 370 LUMINA 1.2 ZOOM
8MM SILENT PROJECTOR
-
(3) For large screen projection or for video transfer. With automatic
threading through the film gate, 400' reel capacity, reverse and single
frame projection, variable speed control (approx. 15 to 30 fps),
retractable power cord. A bright picture with the fast f1.2 15mm to 25mm
zoom lens and low-volt DLG, DLS or DKR 150 watt bulb. Has two position
lamp brightness switch to save lamp life when a bright image isn't
necessary. Runs beautifully and in Near Mint condition with splicer and
instruction book -
$499
(No Discount)
-
Also a model 370 , same as above, but with the bright 23mm f1.2
lens, in Like New condition -
$449
(No Discount)
|
|
KODAK HI-MAT 8MM
AUTOMATIC SILENT PROJECTOR
- A beautiful projector that has automatic threading to
the take-up reel, 400' reel capacity, reverse projection, with a
wide 3/4" f1.6 lens, two level focus knob for critical control
of fine focus, and variable speed control. Takes the 21.5 volt
150 watt DKR, DCF, DLG or DLS bulb for a bright image and has a
two position lamp brightness switch. Comes with the instruction
book and sample film. Like New cosmetic and Mint operating
condition -
$499
(No Discount)
|
 |
STANDARD 8MM SOUND
MOVIE PROJECTORS
 |
EUMIG MARK-S
8MM
MAGNETIC SOUND PROJECTOR |
- From 1968, this is the best performing regular
8mm sound projector made. In many ways I consider this
model superior to the later Eumig super and dual-8
models. Beautiful condition and meticulously
refurbished (totally rebuilt) to run and last like
new, including new motor mount bushing supports. This is the late model with
the improved film gate and pressure pad design. Excellent loud sound from
the 3 tube amplifier. Has automatic threading through
the film gate; manual threading through the sound head
to the take-up reel. Shows sound or silent film much
better and safer than the dual-8 models. Has pilot
lights that come on when the projection bulb is off for
easy threading in the dark. Runs in forward and reverse.
Has a variable speed control for speeds from 15 to 25
frames per second. This makes it excellent for
electronic image transfer to the computer or DVD,
without flicker at 20 fps, through a video camera. The
brightest picture available in any 8mm projector using
the inexpensive FCR 12 volt 100 watt bulb and f1.3 zoom
lens. Almost all steel and metal construction. Operates
at 110 to 250 volts, 50 or 60 hertz. Comes with 400' take-up reel,
protective hard plastic cover, instruction book,
spare bulb and commercial sound film.
Excellent+ to Like New cosmetic condition and runs Like New -
$1399
(No Discount)
|
|
|
EUMIG MARK-S 709 DUAL-8MM SOUND PROJECTOR
Will Run 8mm and Super-8 (Single-8) Sound and Silent
Films
-
Eumig is the only manufacturer to make a dual-8
sound projector. This is the first and best
dual-8 model they made with partial manual
threading and high quality tube amplifier for
great full sound. It will show both 8mm and
super-8 sound and silent films. Handles both
film formats well because of the separate
sprockets and film gates supplied, which are
stored neatly inside the protective cover. You
simply switch the parts out when changing film
formats. It has automatic threading through the
film gate, then you manually thread the film
through the sound heads to the take-up reel.
This makes it very easy to unthread in the
middle of a reel. Runs in forward or reverse.
Has variable speed settings from 15 to 24 frames
per second, 600' reel capacity and a bright
image with the f1.4 15 to 25mm zoom lens and
inexpensive, 50 hour life, FCR 12 volt 100 watt
bulb. Excellent for transferring films to DVD.
Comes with instruction book, spare bulb and with
a super-8 sound and 8mm sound film so you can
test it out right away. Excellent cosmetic
condition (not mint looking like the one
pictured, but close) and Mint restored running
condition -
$1499
(No discount)
|
 |
** All Projectors On This Page Are For Standard/Regular 8mm Film Only
Unless Noted **
For
spare projector bulbs, check myBULBS page. If I
don't have what you need, there are links there to other bulb and lamp sites.
Up To PROJECTORS & EQUIPMENT
Any item or film that is in RED TEXT
means that it is on hold, but I haven't yet received the order.
This means when I receive the order I will remove the item, or if I do not get
the order I will leave it listed and change the red text to black.
Go to ORDERING
INFORMATION if you are ready to place an order or want to call me or send an
Email.
This Site Is Designed And Copyright 1999 - 2019 By Phil Johnson
Do not use images or contents on any other web site or in print.
